Meet the new TORO Dingo TX 427 Narrow Track Compact Utility Loader.
The Dingo TX 427 narrow track possesses the versatility to handle countless jobs on every site: dig, haul, plant and build. The TX 427 design provides a low 5.1 psi ground pressure which is easy on turf. Also, at 34″ wide it can easily fit between a 36″ gate making tight area access a breeze. Designed with workers in mind, all of its power is harnessed in only 3 easy to use controls, which make it simple for any worker to step up and be productive immediately!
You’re up and running in a flash with three easy-to-use controls.
1) The joystick loader control lets you curl, dump or float the bucket while simultaneously raising or lowering the loader arms – all with one hand.
2) With your other hand, you can grab the one-hand traction drive from any angle, for effortless control. 3) The third control, the auxiliary circuit control lever, which can be activated while operating the traction drive, powers the attachments instantly.
Exclusive TX Track Drive
Low center of gravity and large footprint increase stability on side hills and provide smooth operation over rugged terrain; eliminates tire ruts and flat tires.
4-Pump Hydraulic System
The 4-pump hydraulic system lets you simultaneously operate the loader, bucket, traction, and auxiliary drives for increased operator efficiency. This system directs hydraulic power precisely where you need it!
Narrow enough so you can bring hydraulic power to tight areas; through doorways and gates previously accessible only by manual labor. Plus it provides zero radius turn capability for unmatched maneuverability.
Air-Cooled Gasoline Engine
A 27 hp (20 kW) Kohler® engine provides the necessary power to drive any one of the multitudes of Toro attachments available for the Dingo TX.
Durable Kevlar reinforced tracks offer extended life, unlike competitive units with metal inserts. Open design of tracks offers self cleaning, preventing the collection of sand, rock, mud, and debris that could jam tracks.
25 HP (18.6 kW) Kohler Command Pro Series CH 740
11.4 gpm(43.2 lpm)
4.6″ (11.7 cm)
0-4.5 mph (0-7.2 km/h) / 0-2.0 mph (0-3.2 km/h)
46.1″ (117.1 cm)
Hinge Pin Height
65.8″ (167.1 cm)
Hydraulic System Pressure
92″ (233.7 cm) w/bucket; 70.7″ (180 cm) w/o bucket
Loader Hydraulic System
Joystick control for all
535 lbs. (243 kg)
10.5 gallons (40 liters)
1,530 lbs. (694 kg)
96.6″ x 5.9″ (245 cm x 15 cm)
Product – One Year* / Engine – Three Year*
1,882 lbs (854 kg)
33.7″ (85.6 cm)